PATIO SYSTEMS

‘Trias Alu’ decking substructure: perfection as a foundation

 

The ‘Trias Alu’ decking substructure from Blauform, thanks to the ‘Trias Connectors’ system, provides the perfect base for decking with slab or plank surfacing. Aluminium is warp-free, weather-resistant, low-maintenance and easy to work with. The ‘Connector’ principle from Trias ensures stable plug-in connections, which are also securely bolted in place. This creates a level, durable and highly load-bearing base for both slabs and decking boards. The chosen decking is secured using ‘Trias Multiclips’. Planks with grooves can be installed without visible screws. This is quicker and gives a particularly minimalist look. It is also possible to screw down planks without grooves directly. Changing the decking is straightforward, provided the material thickness remains the same. The comprehensive system also includes pedestal supports and other accessories, ranging from the Raingrid to optimised edge solutions.

 

Three installation heights for flexible use
Profiles in the ‘Trias Alu’ system are available in three variants: ‘Slim’, ‘Basic’ and ‘Ultra’. ‘Trias Alu Basic’ can be used for most applications. The profile height is 50 mm. Side alignment aids facilitate the installation of cross-connections. ‘Slim’ profiles, at just 25 mm high, reduce the overall height. Heavy-duty ‘Trias Ultra’ profiles, at 99 mm high, can span large distances. Significantly fewer support points or pedestal bearings are required. The ‘Alu Ultra’ profile is designed to be multifunctional and features both a mounting point for Multiclips and a screw channel to facilitate the insertion of screws. Using the ‘connector’ principle, the heavy-duty profile can be connected to ‘Basis’ and ‘Slim’ profiles. Furthermore, lateral webs allow ‘Trias Wabic’ grid boards to be supported. On substrates made of ‘Wabic’ boards, decking boards can be laid with significantly greater flexibility. ‘Wabic’ boards also offer effective protection against break-through. The honeycomb structure is highly resilient.

‘Black Line by Trias’ for a uniform decking appearance Blauform also offers all
profile strips as ‘Black Line by Trias’ in black anodised aluminium. Black profiles ensure a more uniform decking appearance, as the material of the substructure does not show through at the joints.

Connecting pedestal supports without tools
In the Trias system, aluminium profiles and pedestal supports can be connected without tools using ‘add-on clips’. The profiles are simply clicked into place. Trias offers pedestal supports in various base heights. All pedestal supports can also be adjusted continuously. From the lowest to the highest base height, a wide range of pedestal support heights from 10 mm to 420 mm can be covered.

The ‘Trias Configurator’ allows you to plan your requirements individually. Trias is a brand of Blauform GmbH and is available from specialist retailers.

A stable base for decking and paving slabs: ‘System Trias Alu’ is warp-free, weather-resistant and can be used flexibly thanks to the ‘connector principle’.

Trias’s ‘Alu Ultra’ heavy-duty profile can be used to span large distances. It can be combined with the mesh panels from the ‘Trias Wabic’ system.

Trias’ ‘connector principle’ ensures stable cross-connections and can also be used for building steps.

“Trias Alu” terrace substructure system: Practical edging solutions within the system.