TRIAS terrace substructures

Are you wondering whether you need a high-quality substructure for building your decking and which system is the right one? As a general rule, the quality of the substructure determines the quality of the decking. Furthermore, repairing damage to the substructure is a labour-intensive process. It’s worth prioritising safety right from the start when building a decking. PLEASE NOTE: A sub-frame is always required for decking made of planks, as the planks (made of wood or WPC) must not come into contact with damp ground. 

What are the advantages of a sub-frame?

A substructure is a secure support system for decking, which usually rests on pedestals of varying heights. The decking does not come into direct contact with the ground. The main advantages of a decking substructure are:

Improved structural integrity and appearance
– longer lifespan for the decking
– no tilting, sagging or buckling
– an attractive decking finish with neat joints 

Compensating for differences
in level, e.g. from the floor to the patio door

Solution for specific building situations
, e.g. on a slope or on a roof terrace

Ventilation and improved air circulation
– Protection against rising damp and waterlogging
– Protection against insect and fungal infestation (particularly in floorboards)
– Reduction in swelling and shrinkage

Cavity beneath the decking
– provides space for installations (cables, hoses, etc.)
– easy maintenance

System solution for easy installation
– the systems offer a wide range of installation aids
– extensive range of accessories
– can
be laid over existing floor coverings – adjustable pedestals simplify the process of levelling the floor

What types of decking substructures are available?

Sub-structures are categorised into profile systems, mesh floor systems and simple pedestal support systems. TRIAS offers all three systems:

TRIAS ALU – our profile system


– for floorboards and tile flooring
– aluminium
profile rails – very high load-bearing capacity
– can be combined with TRIAS WABIC

About the TRIAS ALU system​​​​​​​

TRIAS WABIC – our grating floor system


– for panel cladding
– plastic
mesh panels – lightweight construction
– very easy to install
– panels
can be laid freely – fall-through protection

Aluminium or timber for the decking substructure?

The profile rails of a substructure can be made of aluminium, timber or WPC. As a general rule, we recommend aluminium because of its high load-bearing capacity and durability. Aluminium also retains its dimensions well, is virtually warp-free and weather-resistant. It can be sawn and drilled in much the same way as timber. Furthermore, aluminium is highly recyclable. Unlike timber, the material does not require any time-consuming maintenance.
 

Flexible and robust –
for timber, WPC and stone
 

The TRIAS ALU substructure is suitable for decking and slab flooring. The TRIAS ALU Multi-Clip system can accommodate timber, WPC or even BPC decking. Slab flooring made from natural stone or porcelain stoneware is also possible. Stone decking can be laid securely and freely on TRIAS WABIC. Would you like an unusual laying pattern? That’s no problem with our raised floor system.

What should you look out for when
choosing pedestal supports?

 

Pedestal supports form the foundation of any substructure. They are available in various heights. The height can be adjusted very precisely using a threaded mechanism. Extensions can be attached to allow for an even greater overall height. The self-levelling mechanism compensates for uneven surfaces. Depending on the flooring, various adapters are available to accommodate profiled rails or grating, or to lay them directly on the pedestal supports. The pedestal supports must be placed on a load-bearing substrate. For outdoor use, we recommend a compacted gravel bed and a concrete slab as the sub-base. The number of pedestals can be planned using the TRIAS configuration tool. We recommend discussing the preliminary planning with a specialist. Specific conditions may always require a different approach.

Terraces with a system

With the right substructure, building a decking becomes a breeze. TRIAS offers high-quality systems with a wide range of accessories for easy installation – whether you’re a professional or a DIY enthusiast. If you’re looking for maximum stability, choose TRIAS ALU. The aluminium profiles can be worked in much the same way as timber, but are significantly more durable. Terrace construction is made particularly easy with the TRIAS WABIC double-deck system. This is a lightweight system that is easy to transport, store and assemble. The boards are assembled piece by piece, creating a level surface on which the decking boards can be laid flexibly.  

Plan your dream terrace now

Would you like to get started on planning your patio straight away? The TRIAS configurator helps you design your dream patio and estimate the materials required.