Trias’ high-quality aluminium decking substructures are ideally suited for use in public areas. They are highly durable, warp-free and weather-resistant. This means there is no loss of revenue due to unexpected maintenance work. For unrestricted use in public areas, the substructure must be able to withstand a load of 5 kN. The Trias Alu substructure has been statically calculated and, provided the specified span is adhered to, can bear a load of up to 5 kN/sq m in accordance with DIN 1991-1-1. The ‘Trias Alu Ultra’ heavy-duty profiles can be used to span large distances, even on uneven ground. The profiles in the ‘Ultra’ variant can also be combined with the mesh panels from the ‘Trias Wabic’ system.
The “Trias Wabic” raised floor system offers guests even greater safety, as it provides protection against break-ins and protects high-quality floor coverings. Large-format tiles, in particular, can shatter into sharp shards if broken, posing a high risk of injury. Even fine hairline cracks can lead to breakage when subjected to load. The ‘Trias Wabic’ system also makes it easier to lay tiles and allows for a wide variety of laying patterns. ‘Trias Wabic X-Pads’ act as laying spacers and can be positioned freely across the surface. The pedestal supports of the ‘Trias Wabic’ system can be easily readjusted without lifting the grid panels. The ‘Trias Wabic’ system can be used on bound substrates, unbound substrates in contact with the ground and substrates with delayed drainage, as well as on concrete surfaces with or without waterproofing. ‘Trias Wabic Boards’ have been tested in accordance with DIN 24537–3, with a test load in accordance with RAL-GZ 638. To ensure the strength of the entire system, only slab coverings with appropriate proof of strength may be used.
Good to know: Plastic components are not permitted in escape routes as they may melt in the event of a fire. For sensitive areas, we recommend a sub-frame made entirely of aluminium. The ‘Trias Alu’ system is connected using aluminium connectors and securely bolted in place. Support pedestals can be bypassed by using heavy-duty profiles. This allows for spans of up to three metres without the need for support pedestals. Brick-built perimeter walls are suitable as support surfaces.
Trias’ premium privacy screening system allows for a wide variety of design panels and numerous combinations. You can even incorporate your own materials, such as tiles or façade elements, to create a personalised ambience. At the heart of the system is the Trias base post, made from weather-resistant aluminium. Depending on the infill material, it is supplemented with appropriate add-on modules. New to the range are aluminium slats with a wood-effect finish. Like Trias’s aluminium rhombus slats with a wood finish, they require significantly less maintenance than natural wood and are easy to clean. Glass panels effectively block the wind and create a bright, welcoming atmosphere for guests. Trias offers minimalist add-on modules for a streamlined look.