The spacer for grooved decking boards ensures a uniform board spacing of 7 mm. The height of the spacer can be adjusted. The clip system creates a minimalist decking look and allows for concealed screw fixing to a timber decking substructure.
– Wood protection through full under-ventilation, which prevents
waterlogging – Pre-cut break lines for the start and end
of the decking – Concealed screw fixings
– Uniform board spacing of 7 mm
– Suitable for various groove rail heights
PA6 plastic
Screw fastening
: Max. screw tightening torque: 1.5 Nm
Decking board and groove requirements
: Board thickness: 20–26 mm
; Groove height: > 3.5 mm
; Groove side wall: 6–12 mm
; Groove depth: 6.5–13 mm
Important notes on decking
The clip is suitable exclusively for decking boards with a groove pre-machined by the manufacturer. Installation using decking boards with a groove milled retrospectively is not permitted under building regulations.
The clip is not suitable for tropical woods. For tropical woods, decking boards that have not been kiln-dried, and woods prone to significant warping, direct screw fixing is recommended.
Modified decking boards or dried timber with low swelling and shrinkage properties must be used. The timber must be allowed to acclimatise for at least 48 hours before installation.
The system is also suitable for WPC and BPC decking. The decking manufacturers’ specifications must be followed as a priority. Product standards and application recommendations for decking and flooring from the GD Holz are available from specialist timber retailers.
30 x TRIAS Clip-T Wood
, including stainless steel screws
Terrasse online planen
Stellen Sie uns gerne Ihre Fragen